Home Site

How do you fix a sewing machine?

Catch the bottom thread by turning the hand wheel towards you so the needle goes down and up. Be sure both threads are under the foot and the upper tension dial set at number 4. Place the stitch length lever/knob at the longest stitch. Put 2 or 3 layers of regular cotton under the foot.

How do you get the bobbin thread up?

Make sure the presser foot is up when seating the thread through the upper tension. Now, it’s time to draw up your bobbin thread. Turn the handwheel (TOWARDS YOU ONLY, never turn the handwheel away from you) and hold the needle thread lightly. Tug on it as the needle goes down and then comes up again.

How do you take care of sewing machine?

Regular upkeep should keep your machine in tip-top shape. Store your sewing machine under a dust cover at room temperature in a dry place. Use only new, high-quality thread to reduce interior lint buildup, and regularly unplug the machine and dust inside the bobbin case with a soft cosmetic brush.

Why does my thread getting tangled?

Your first thought when the bobbin thread makes a tangled mess is that thebobbin is at fault. That is not usually the case. The upper threading is usually the culprit so re-thread the upper part of the sewing machine making sure the thread is passing through every thread guide on its way to the sewing machine needle

How do I loosen the tension on my sewing machine?

To decrease your top tension (if your top tension is tight) turn your knob so that the numbers are decreasing. Try 1/2 to one number lower, then test on a light piece of scrap fabric with a different colour thread top and bottom.

How do I adjust the tension on my sewing machine?

To make a temporary tension adjustment, select the threads for the needle and bobbin, then fill the bobbin and thread the machine. Make a test seam on the fabric that you plan to sew, examine the stitches, then see if you can find a balance using the upper-tension assembly alone.

Why is thread bunching up on the bottom?

Check Your Tension Settings. Looping underneath the fabric usually occurs when there is not enough tension in the needle thread to pull the bobbin thread. Sometimes thread buching can be caused by something as simple as the tension dial being inadvertently turned.

Why is my sewing machine missing stitches?

When the stitches randomly start skipping, change your needle. If the stitchesreturn to normal, then the problem was a bent needle. It can be caused by such things as tugging too hard on the fabric or the needle hitting a pin. … When sewingknits use a ballpoint needle, and sharps for woven fabrics.

How do you time as sewing machine?

Check for a timing issue by performing a timing test.

  1. Leave the needle threaded, but remove the switchplate, base cover(s), and bobbin case.
  2. Turn the hand wheel slowly to ensure that the shuttle hook is smoothly catching the thread. …
  3. Use a ruler to measure the timing settings.

Why does my sewing machine keep getting stuck?

Fabric jamming in your machine may be caused by the feed dogs. The feed dogs are those tiny teeth along the sewing machine underneath the presser foot as those teeth pull the fabric through when the needle is making stitches. Lint or debris in the feed dog area can jam the mechanisms preventing them to move.

How do I oil my machine?

A screw driver will come with the machine.

  1. Clean the feed dog. Remove the bobbin. Use the brush supplied to clean the area. Remove the bobbin case. …
  2. Lubricate the points in the instructional manual with 1-2 drops of sewing machine oil. Turn the handwheel until the hook race is in the left position. Replace the hook.

Why does the upper thread break?

The needle may be inserted incorrectly or the eye may have sharp edges, the machine is not properly threaded or the upper thread tension is too tight.

How to insert a needle?

Raise the needle to its highest position. On most sewing machines, there’s a screw on the side of the needle bar. Loosen this screw and slide the old needle out. Insert the shank (the upper part) of the new needle into the needle bar, usually with the flat side facing away from the bobbin area (check your manual to be sure). Push the needle up as far as it will go. Tighten the screw.

Why does my sewing machine run heavily?

Machine may need oiling, dirt or lint buildup in the shuttle or dirt and lint between the teeth of the fabric feed dogs.

How often should I have my sewing machine cleaned and serviced?

It depends on how often the sewing machine is used and the type of work done on the machine. Cotton fabrics and thread tend to create more lint buildup on your machine. Servicing and cleaning your machine allows the machine to operate smoothly. Also a machine that has been in storage for some time will require servicing as the lubricants can dry up over time.